Smooth Fine Detail Plastic
HO NSWR LQ LH Offset Bracket Signal + Parts
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$53.73
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is an offset bracket signal with a dolly post on the left hand side printed in Smooth Fine Detail Plastic (previously called Frosted Ultra Detail - FUD) acrylic material that shows fine detail such as bolt heads, thinner components, etc.
The offset bracket signal is used where visibility is restricted such as in a cutting on a curve or where buildings obscure the signal on a curve.
A set of detail parts containing a 39 inch signal arm, other details such as finial (Finial - officially known by NSWGR as a Pinnacle), lamp top, lamp 'backlight blind', cast ladder base and counterweight lever is included with this signal. A spare part for the lamp top and counterweight lever is included.
To complete this signal a mechanism needs to be purchased and glued underneath the signal (see - Signal Mech - Short 1 Arm in the Other Items section of the shop).
A ladder for the signal is also needed and a sprue of two 21 foot ladders printed in Smooth Fine Detail Plastic (previously called Frosted Ultra Detail - FUD) acrylic material can be purchased from this Signals Branch Shapeways Shop. A sprue of 10 ladders with cast iron bases are also available.
If you wish you could instead purchase an etched brass ladder.
Also required are some 0.015" phosphor bronze wire for operating rods, handrails and several small screws.
The offset bracket signal is used where visibility is restricted such as in a cutting on a curve or where buildings obscure the signal on a curve.
A set of detail parts containing a 39 inch signal arm, other details such as finial (Finial - officially known by NSWGR as a Pinnacle), lamp top, lamp 'backlight blind', cast ladder base and counterweight lever is included with this signal. A spare part for the lamp top and counterweight lever is included.
To complete this signal a mechanism needs to be purchased and glued underneath the signal (see - Signal Mech - Short 1 Arm in the Other Items section of the shop).
A ladder for the signal is also needed and a sprue of two 21 foot ladders printed in Smooth Fine Detail Plastic (previously called Frosted Ultra Detail - FUD) acrylic material can be purchased from this Signals Branch Shapeways Shop. A sprue of 10 ladders with cast iron bases are also available.
If you wish you could instead purchase an etched brass ladder.
Also required are some 0.015" phosphor bronze wire for operating rods, handrails and several small screws.
Details
What's in the box:
HO NSWGR LQ LH Offset Bracket Signal + Parts
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
