Click and drag to rotate
GroWall System Cell 3d printed

DIGITAL PREVIEW
Not a Photo

Green Processed Versatile Plastic
GroWall System Cell 3d printed
GroWall System Cell 3d printed

DIGITAL PREVIEW
Not a Photo

GroWall System Cell

Made by
Print With Shapeways
Choose Your Material
$67.12
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
   Each standard GroWall System Cell is uniquely designed to easily mount independently to any wall with two typical 4mm diameter carpenter's screws and, conveniently vertically stack together with no additional components required. The lowest cell inserts into the water pipeline port and drainage port of the GroWall System Reservoir Top -and- on top of each additional cell in your system's cell series while, the GroWall System Cell Plug securely attaches to the uppermost cell -to keep the nutrient rich water being cycled through the system contained in leak-free fashion.

Product Details:
   Each standard GroWall System Cell measures a mere 90mm (3.54 in.) wide, extends 83.8mm (3.3 in.) from the wall and, are 110.2mm (4.34 in.) tall -making them small enough to easily fit within the palm of your hand. Installation is as easy as vertically mounting it in series on top of your GroWall Reservoir assembly.

Each cell also has two slip-in screw brackets built into the upper portion of the back panel (sized for any 4mm diameter thick carpenter's screws) to allow them to be securely mounted to any wall with ease.

Each cell has a single support footer built into the lower portion of the back panel that, allows each cell to rest vertically flush against any wall with 2mm of spacing between the back panel and the wall.

Each cell has a built-in misting pipeline with a 1mm misting port aimed directly at the 1.5mm net cup/pot port -to keep the roots of your plants fed with a mist of nutrient rich water. Water is pumped to the first lowest cell in the series from the GroWall System Reservoir where it will then feed all excess water up to each other cell in the series in turn before it drains back down the cell series into the reservoir.

The lowest cell easily connects to your GroWall System Reservoir Top by simply inserting it's pipeline and drainage nozzles into the two matching ports located on top of the reservoir assembly. The rear pipeline port nozzle is used for pumping water up into the cell series installed in your GroWall System assembly and, the forward drainage port allows water to drain back into the reservoir. Both of these ports are located on the bottom of every cell and, easily inserts into each of the matching ports on top of every GroWall System Cell. Together, these ports allow you to easily stack multiple cells in series offering a water tight seal throughout the entire assembly.

The 1.5 inch diameter Net Cup/Net Pot port of each cell can fit most standard sized 1-1/2 inch hydroponics/aeroponics net cup/net pot sizes.

The GroWall System Cell's well design allows plenty of space for roots to grow to the plants full mature harvest size.

What else you need to use our GroWall System to grow all your preferred varieties of indoor plants, herbs and leafy vegetables:

- First, you'll need our other GroWall System assembly components consisting of; 1 GroWall System Reservoir Base (available in both large and small sizes), 1 GroWall System Reservoir Top, 1 GroWall System Top Cell Plug -and- 1 (or more) GroWall System Cells,

- The seeds for the plant varieties you wish to grow,

- An equal amount of 1.5 inch net cups/pots to the number of cells in your system,

- Your preferred Aeroponics growing medium,

- The appropriate water enrichment nutrient products specifically suited to the plants you wish to grow (available from your local gardening center/online retailer),

- An appropriately sized submersible aquarium water pump (available from most pet stores),

- An appropriately sized hose adapter to fit onto your water pump and, 8mm or 10mm tubing/hose to connect your sumbersible aquarium water pump to the feeder nozzle inside the reservoir top,

- An Aeroponics repeat cycle timer (to regulate your water pump),

- An appropriate lighting system w/ a buit-in timer and,

- 2 - 4mm diameter screws (per top and cell components) -to secure each component to your wall during your GroWall System installation.

Visit our Perma-Living Programs page on  RFCINCo Online to review everything we offer about the GroWall System and its related products and resources.

 
Details
What's in the box:
GroWall System Cell 2
Dimensions:
8.98 x 8.3 x 11.17 cm
Switch to inches
3.54 x 3.27 x 4.4 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.