1/700 German 8.8cm Pak 43 Jagdtiger Tank x10

1/700 Scale WW2 German Army 8.8cm Pak 43 Jagdtiger Tank Destroyer.
Contains 10 highly detailed tanks.

Contains:

• 10x 8.8cm Pak 43 Jagdtiger Tank Destroyers

8.8cm Pak 43 Jagdtiger Tank Destroyer
In November of 1944, Krupp proposed to arm Jagdtigers with longer 128mm Pak L/66 gun. The superstructure was be extended over the engine deck to allow for the recoil of the gun. The project was never realized.It was also intended to arm Jagdtiger with 88mm KwK 43 L/71 gun instead of 128mm Pak 44 L/55 gun.In April of 1945, four were armed with 88mm Pak 43 L/71 gun and were designated as Panzerjäger Tiger mit 88mm Pak 43/3 (Sf)Sd.Kfz.185, while those armed with 128mm Pak 44 L/55 were designated Sd.Kfz.186.

Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.

Let your parts sit in direct sunlight for a few hours to fully cure the resin.  
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.      

Painting tips and preparation