** Dear customers we have put this product on hold due to some recent print issues. We thank you for your patience while we resolve the issue **
The Fusion Imaging V3 Sputnik is our V3 Prop Guard Connector with the addition of an integrated 5mm leg extender slot. You simply insert a 5mm carbon firbe/fiber glass rod (must be purchased separately) into the slot to create the leg extension (see video).
You are purchasing 2 V3 Sputnik connectors.
The V3 Sputnik continues our development with more precise geometry contoured to the shape of the ends of the phantoms arm. This maximises grip and lowers weight. The pins on the end of the V3 connects to your phantom to provide a lock in system adding additional grip and a more secure fit.
The stability of the four extended legs assists in eliminating reducing flipping over on landing ands the additional height also reduces any possible damage to your Phantoms camera when landing on uneven or rough surfaces.
Available in a range of colours (mixed colours must be ordered separately). Colour matched feet for the legs are also included in your purchase.
Designed for DJI Phantom 1 and Phantom 2 Vision only.
Note: For illustration/demonstration purposes we have used a DJI Phantom 2 Vision + (plus). However the V3 Sputnik is recommended for the Phantom 1 and Phantom 2 Vision ONLY, as the camera is located in the centre underside of the Phantom. For DJI Phantom 2 with GoPro, or Phantom Vision 2 + (plus) where the camera is located off centre we recommend the Click-On Leg Extender 'Wide' which prevents the leg extender from appearing in your video. You can however use the V3 Sputnik on all DJI Phantom models purely as a prop guard connector without utilising the leg extender feature.
Follow us on Facebook
, and Instagram
We only ship the V3 Sputnik and 4 feet to attach to your legs. To attach the V3 Sputnik to your prop guards we recommend 4x M3 13mm or longer screws with nuts. Alternatively you can use the screws supplied with your prop guard but will need nuts to tighten to the V3. 5mm carbon fibre/fiberglass rods for the legs are not included and must be purchased separately.
We take no responsibility for incorrect installation or misuse of our product.
Disclaimer: Whilst meticulous care and consideration is taken in the design of our products, due to the tolerances in materials, colours, finishes, manufacturing plants and techniques, some products may display slight variations in tolerances that may affect their function. Fusion Imaging urge customers to consider these tolerances and exercise caution. Fusion imaging will not take responsibility for injury or damage to property caused by the use of its products.