Gray PA12
TF POTP Combiner Lateral Hip Fix
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$7.00
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a custom spacer for your Transformers Power of the Primes Voyager Figures Elita 1, Starscream and Hungurr. This adds additional tension to the hip joint of the cimbiner, making them firmer and allowing them to stand more solidly. This will not fix all the loose joint issues with the figure, but it will certainly help.
This is sold as a set of 2 pieces connected together. You will need to cut separate them and cut off the excess plastic
To install, unscrew the shoulder joint of the individual bot. Pull apart the shoulder assembly. Everything will slide apart. Add the Spacer under the Spring. Line everything back up and screw together.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Natural Versatile Plastic, Premium Versatile Plastic and Processed Versatile Plastic.
For tightening the combiner joints, please seem my other product here:
https://www.shapeways.com/product/T95RXWKDY/tf-cw-potp-gen-selects-spring-tightening-spacers
For fixing the hips frontal movement, please see my other product here:
https://www.shapeways.com/product/PZTJX5TEA/tf-potp-combiner-elita-frontal-hip-fix?optionId=135625722
This is sold as a set of 2 pieces connected together. You will need to cut separate them and cut off the excess plastic
To install, unscrew the shoulder joint of the individual bot. Pull apart the shoulder assembly. Everything will slide apart. Add the Spacer under the Spring. Line everything back up and screw together.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Natural Versatile Plastic, Premium Versatile Plastic and Processed Versatile Plastic.
For tightening the combiner joints, please seem my other product here:
https://www.shapeways.com/product/T95RXWKDY/tf-cw-potp-gen-selects-spring-tightening-spacers
For fixing the hips frontal movement, please see my other product here:
https://www.shapeways.com/product/PZTJX5TEA/tf-potp-combiner-elita-frontal-hip-fix?optionId=135625722
Details
What's in the box:
Elita 1 Shoulder Upgrade
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
