You must be logged in and verified to contact the designer.
Product Description
Also available at 1tenth.com
Here's V2.4 nylon version of the TRX4 Front Portal SOA. This one took into account user feedback as we updated the original design.
DOES NOT INCLUDE SIDE BRACE. If you're using a high power servo please check out the one with the side brace or our metal versions.
Like the original design it still cups the panhard mount for support on the passenger side. It will sit over the existing 3-link mount and create a 4th link slot next to that.
Changes:
Only screws and/or nuts required for install. No more servo mount plate
More room for link clearance on top
Servo lowered slightly
Drivers side brace added for additional stability
Block between link mounts can now be threaded. No longer need to run one long screw all the way through. One long screw still recommended.
This design is mainly intended for custom builds. The stock TRX4 skid and chassis don't have provisions for a 4th link. You CAN however drill a hole in the chassis and mount a link according to a couple customers.
We're seeing about a 450-500 oz/in max on the servos for the Versatile Plastic and our inhouse Ninjatek prints without a side brace. Make sure those endpoints are set. If you really beat on the rig and are running heavy metal rigs it'd probably be best to check out our metal adapter instead.
Will need:
1 x M3x~50mm for the 4-link screw with brace. You can try getting away with 2 x M3 just make sure you don't bottom them out together.
4 X M3x~20MM to mount the servo
1 X M3x~12mm for the panhard
1xM3x~12mm for the side brace to connect to the shock tower.