White Natural Versatile Plastic
1Tenth SOA 4 Link Axial AR45P AMS Servo Mount
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$17.63
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
When you're looking to mount a servo on your ARP45Ps and convert to a 4 link setup I have you covered!
This is V1.1 with 2 different upper link mount locations.
My personal preference is center triangulated but that can be hard with some drivetrains and the AR45 Portals. So I added some mount spots on the sides of the servo. The screws will go "inside out" to mount the links.
Mount slips over truss, uses factory 3 link location for a side brace, and a screw on the back of the pumpkin. Designed for lightweight builds and up to about 500oz/in servos. If you're full metal and/or big power servo I'd highly suggest the BOCO steel version available at 1tenth.com
You'll need - M3x42-45MM for the links (42mm is hard to find so 45mm with a few spacers works)
M3x12MM through the truss to front of axle
2x M3x15MM for the higher link mounts
4MM longer screw for diff cover.
If you're ok with cutting the stock axle, trim the outer portion of the factory 3 link mount, and use a M3x32mm through the links
This is V1.1 with 2 different upper link mount locations.
My personal preference is center triangulated but that can be hard with some drivetrains and the AR45 Portals. So I added some mount spots on the sides of the servo. The screws will go "inside out" to mount the links.
Mount slips over truss, uses factory 3 link location for a side brace, and a screw on the back of the pumpkin. Designed for lightweight builds and up to about 500oz/in servos. If you're full metal and/or big power servo I'd highly suggest the BOCO steel version available at 1tenth.com
You'll need - M3x42-45MM for the links (42mm is hard to find so 45mm with a few spacers works)
M3x12MM through the truss to front of axle
2x M3x15MM for the higher link mounts
4MM longer screw for diff cover.
If you're ok with cutting the stock axle, trim the outer portion of the factory 3 link mount, and use a M3x32mm through the links
Details
What's in the box:
1Tenth-AR45P-SOA-V1.1
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
