White Natural Versatile Plastic
1/144 RN 6 Inch MKXIII Crown Colony Class Turrets
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$87.59
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Highly detailed 1/144 scale RN MKXXII Triple 6 Inch Turrets model upgrade parts.
Ideal upgrades for Crown Colony Class Cruisers with no Oerlikon tubs and Director on X turret i.e HMS Nigeria or Trinidad
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Ideal upgrades for Crown Colony Class Cruisers with no Oerlikon tubs and Director on X turret i.e HMS Nigeria or Trinidad
- Highly detailed and accurate replacement part for those
wishing to build Crown Colony Class Cruisers. - Specifically designed for 1/144 scale
- Printed without barrels
- See MY SHOP for other variants of this set.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
144 Trinidad Turrets.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
