TF CW Cybertron Leo Combiner Adapter Set
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$20.36
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a set of adapters for Leobreaker (repaint variants) to combine with Combiner Wars Toro figures. This is sold as a set of 2 adapters, one for each shoulder. This will give your combiners the Savage Claw Mode. The adapters are designed so they can display 2 differnet looks. The adapters have 5mm ports, making them compatible with blast effect parts.
Due to the added weight and bulk of the Savage Claw Mode, I recommend balancing your combiner with 2 savage claw mold figures.
These parts are connected. You will need to separate them and trim off excess plastic with a hobby knife or plastic cutters
This is intended for adult collectors. This is not designed for rough play by children.
This was dested on my home printer, printed in PLA plastic. When fitting the part, press firmly and evenly. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
Due to the added weight and bulk of the Savage Claw Mode, I recommend balancing your combiner with 2 savage claw mold figures.
These parts are connected. You will need to separate them and trim off excess plastic with a hobby knife or plastic cutters
This is intended for adult collectors. This is not designed for rough play by children.
This was dested on my home printer, printed in PLA plastic. When fitting the part, press firmly and evenly. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
Details
What's in the box:
Leobreaker CW Adapter (6)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
