Black Smooth Versatile Plastic
TF Legacy Motormaster Thigh Extension set
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$30.78
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a set of extensions for Transformers Legacy Motormaster to extend the combiner mode legs. This increases the length of the combiner thigh by 20mm. This puts Menasor close to the height of Combiner Wars Menasor, with the Perfect Effect upgrade parts. This is sold as a set of 2 extensions, one for each leg.
The extensions slide into the original ports for the legs. The combiners are designed to accept both the left and right combiner legs. The design does not interfere with the combiner knee bend; you will ge the full 90 degree range of movement. The leg extensions are also compatible with combiner wars torsos and limbs.
You will need to remove the extensions to transform back into individual robot mode and vehicle mode.
This set will come as 2 pieces. These parts are connected. You will need to separate them and trim off excess plastic with a hobby knife or plastic cutters
This is intended for adult collectors. This is not designed for rough play by children.
This was dested on my home printer, printed in PLA plastic. When fitting the part, press firmly and evenly. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been succssfully printed in Shapeways Natural Versatile Plastic, PA12, Smooth PA12, and Smooth Versatile Plastic.
If you want the Combiner wars shoulder adapter for Legacy Meansor, Please see my other product here:
https://www.shapeways.com/product/KDDDTPHYQ/tf-legacy-cw-motormaster-shoulder-adapter?optionId=272227804&li=shops
The extensions slide into the original ports for the legs. The combiners are designed to accept both the left and right combiner legs. The design does not interfere with the combiner knee bend; you will ge the full 90 degree range of movement. The leg extensions are also compatible with combiner wars torsos and limbs.
You will need to remove the extensions to transform back into individual robot mode and vehicle mode.
This set will come as 2 pieces. These parts are connected. You will need to separate them and trim off excess plastic with a hobby knife or plastic cutters
This is intended for adult collectors. This is not designed for rough play by children.
This was dested on my home printer, printed in PLA plastic. When fitting the part, press firmly and evenly. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been succssfully printed in Shapeways Natural Versatile Plastic, PA12, Smooth PA12, and Smooth Versatile Plastic.
If you want the Combiner wars shoulder adapter for Legacy Meansor, Please see my other product here:
https://www.shapeways.com/product/KDDDTPHYQ/tf-legacy-cw-motormaster-shoulder-adapter?optionId=272227804&li=shops
Details
What's in the box:
Legacy Menasor Thigh Extension(1)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
