You must be logged in and verified to contact the designer.
This is the TM8 axle housing created to match our GCM CMAX chassis. This is a Leaf Spring mounted axle housing for the front, and has a LEFT drop on the axle design. (left when driving the truck) This axle will require TM8 Axle Cover for assembly. This axle will require TM8 internal parts found at GCMRacing.ca and TinyTrucks.com websites, and includes bearings, gears, hardware, etc to assemble the axle completely. Link for Axle internal parts here: http://gcmracing.ca/viewitem.php?productid=381 This leaf spring mounted axle will require the large holes to be cleaned out with a 3/32 or 2.5mm drill. The small holes should be cleaned out with a 1/16 or 1.5mm drill before assembly. You may have to clean out the print dust from the main axle tube holes as well. Please use a 13/64 drill to clean out the main tube holes. The leaf spring spacing on this axle will fit RC4wd and Tamiya Leaf Spring vehicles and springs.