Shimano Pro Saddle Garmin RCT715 Mount

Size specific mount for any Shimano Pro saddle with their integrated mount holes. It is a base module and requires the use of the original Garmin RCT715 mount. This module replaces the assortment of rubber shims to provide a secure mount direct to your Shimano Pro equipped saddle.

Here is a simple description of how to use this base module...
​

1. Remove the two torx screws from the back side of Garmin's supplied mount using a T9 torx bit or torx driver. Save these screws as they will be reused. Do not lose them, they are small.
2. Separate the back from the front of the Garmin mount and set aside the rear portion, we no longer need this section of the mount.
3. Attach the new Bontrager Blender compatible module onto the back side of the remaining section of the RCT715 mount and secure with the two screws yuou set aside earlier.
4. Attach the newly completed mount onto your saddle with two M-5 (5 mm)  x 10 mm pan head socket screws.
5. You can use this arrangement exactly like the original Garmin RCT715 mount.

This product is not endoresed by Garmin Ltd or Shimano, Inc. All trademarks are owned by their prespective rights holder.