1/700 German StuG IV Tank Destroyer x10
1/700 German StuG IV Tank Destroyer x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$18.56
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/700 Scale WW2 German Army StuG IV Tank Destroyer.
Contains 10 highly detailed tanks.
Contains:
10x German StuG IV Tank Destroyers
StuG IV Tank Destroyer
The Sturmgeschütz IV (StuG IV) (Sd.Kfz. 167), was a German assault gun variant of the Panzer IV used in the latter part of the Second World War. Identical in role and concept to the highly successful StuG III assault gun variant of the Panzer III, both StuG models were given an exclusively tank destroyer role in German formations and tactical planning in the last two years of the war, greatly augmenting the capability of the dwindling tank force available to the German army on the Eastern and Western fronts.The Sturmgeschütz IV resulted from Krupp's effort to supply an assault gun. As Krupp did not build Panzerkampfwagen IIIs, they used the Panzerkampfwagen IV chassis in combination with a slightly modified Sturmgeschütz III superstructure.
The first known proposal for a Sturmgeschütz on the Panzer IV chassis is in Krupp drawing number W1468 dated February 1943. This initial drawing unitized the outdated Sturmgeschütz Ausf. F superstructure on a Panzer IV chassis 9. This proposal had a sloped front superstructure with a combat weight of 28.26 tons. Krupp abandoned it in February 1943 because it was too heavy. Plans for the StuG IV were halted.
During the Führer Conference of 19 to 22 August 1943, after the Battle of Kursk, Hitler had seen reports of the StuG III outperforming the Panzer IV when used in an infantry support role and tactical defence. Convinced that a tank-hunter version would be superior to the tank version, Hitler planned to switch Panzer IV production to "Panzerjäger IV" production as soon as possible. It was to mount the same 7.5 cm L/70 used for the Panther. Another manufacturer, Vomag built a prototype Panzerjäger IV with 7.5 cm L/48 gun and demonstrated it on 20 October 1943. It was later re-designated as Jagdpanzer IV Ausf. F. As the Jagdpanzer IV was already being produced by Vomag, the StuG IV may not have materialized, had it not been for the major disruption of StuG III production, and the scarce supply of the 7.5 cm L/70 gun designated for the Jagdpanzer IV.
In November 1943, Alkett, the manufacturer of the StuG III, suffered damage due to an Allied bombing raid. Alkett produced 255 StuG III in October 1943, but in December production fell to just 24 vehicles. A conference held from 6 to 7 December 1943, addressed possible solutions to this problem. Hitler welcomed the suggestion of taking the StuG III superstructure and mounting it on a Panzer IV chassis. The StuG IV could be more quickly manufactured than the Jagdpanzer IV at the time. This restarted the Sturmgeschütz IV project. This time, the superstructure of the StuG III Ausf. G was mounted on a Panzer IV chassis 7, with a box compartment for the driver added. Combat weight was 23000 kg, lighter than the 23900 kg for the StuG III Ausf. G. Between 16 and 17 December 1943, Hitler was shown the StuG IV and approved it. To make up for the large deficit in StuG III production StuG IV production was now given full support.
From December 1943 to May 1945, Krupp built 1,108 StuG IVs and converted an additional 31 from battle-damaged Panzer IV hulls. While the number is smaller than the 10,000+ StuG III, the StuG IV supplemented and fought along with StuG III during 1944–45, when they were most needed.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains 10 highly detailed tanks.
Contains:
10x German StuG IV Tank Destroyers
StuG IV Tank Destroyer
The Sturmgeschütz IV (StuG IV) (Sd.Kfz. 167), was a German assault gun variant of the Panzer IV used in the latter part of the Second World War. Identical in role and concept to the highly successful StuG III assault gun variant of the Panzer III, both StuG models were given an exclusively tank destroyer role in German formations and tactical planning in the last two years of the war, greatly augmenting the capability of the dwindling tank force available to the German army on the Eastern and Western fronts.The Sturmgeschütz IV resulted from Krupp's effort to supply an assault gun. As Krupp did not build Panzerkampfwagen IIIs, they used the Panzerkampfwagen IV chassis in combination with a slightly modified Sturmgeschütz III superstructure.
The first known proposal for a Sturmgeschütz on the Panzer IV chassis is in Krupp drawing number W1468 dated February 1943. This initial drawing unitized the outdated Sturmgeschütz Ausf. F superstructure on a Panzer IV chassis 9. This proposal had a sloped front superstructure with a combat weight of 28.26 tons. Krupp abandoned it in February 1943 because it was too heavy. Plans for the StuG IV were halted.
During the Führer Conference of 19 to 22 August 1943, after the Battle of Kursk, Hitler had seen reports of the StuG III outperforming the Panzer IV when used in an infantry support role and tactical defence. Convinced that a tank-hunter version would be superior to the tank version, Hitler planned to switch Panzer IV production to "Panzerjäger IV" production as soon as possible. It was to mount the same 7.5 cm L/70 used for the Panther. Another manufacturer, Vomag built a prototype Panzerjäger IV with 7.5 cm L/48 gun and demonstrated it on 20 October 1943. It was later re-designated as Jagdpanzer IV Ausf. F. As the Jagdpanzer IV was already being produced by Vomag, the StuG IV may not have materialized, had it not been for the major disruption of StuG III production, and the scarce supply of the 7.5 cm L/70 gun designated for the Jagdpanzer IV.
In November 1943, Alkett, the manufacturer of the StuG III, suffered damage due to an Allied bombing raid. Alkett produced 255 StuG III in October 1943, but in December production fell to just 24 vehicles. A conference held from 6 to 7 December 1943, addressed possible solutions to this problem. Hitler welcomed the suggestion of taking the StuG III superstructure and mounting it on a Panzer IV chassis. The StuG IV could be more quickly manufactured than the Jagdpanzer IV at the time. This restarted the Sturmgeschütz IV project. This time, the superstructure of the StuG III Ausf. G was mounted on a Panzer IV chassis 7, with a box compartment for the driver added. Combat weight was 23000 kg, lighter than the 23900 kg for the StuG III Ausf. G. Between 16 and 17 December 1943, Hitler was shown the StuG IV and approved it. To make up for the large deficit in StuG III production StuG IV production was now given full support.
From December 1943 to May 1945, Krupp built 1,108 StuG IVs and converted an additional 31 from battle-damaged Panzer IV hulls. While the number is smaller than the 10,000+ StuG III, the StuG IV supplemented and fought along with StuG III during 1944–45, when they were most needed.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
700 StuG IV X10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
