Set the front track. Then set the rear track using the notches on a Kato rerailer or a piece of double track.
T-TRAK guide - pair
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$8.36
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This tool is to assist constructing and setting up N scale T-TRAK modules.
Use the 38mm notch to position Kato Unitrack 38mm (1 1/2") from the front edge or the 71mm notch if using a single track in the rear position. When setting up 2 tracks, use the standard tools for the correct spacing - either the notches on a Kato Rerailer (24-000) or connect to a piece of concrete tie double track such as 20-042.
There is also a height gauge to help set up by checking the module height is approximately correct (70mm, 2 3/4"), prior to fine tuning height matching with the height adjustment bolts.
Use the 38mm notch to position Kato Unitrack 38mm (1 1/2") from the front edge or the 71mm notch if using a single track in the rear position. When setting up 2 tracks, use the standard tools for the correct spacing - either the notches on a Kato Rerailer (24-000) or connect to a piece of concrete tie double track such as 20-042.
There is also a height gauge to help set up by checking the module height is approximately correct (70mm, 2 3/4"), prior to fine tuning height matching with the height adjustment bolts.
Details
What's in the box:
T-TRAK-gauge-pair
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
