Click and drag to rotate
Look 795 RS MY22 Garmin Varia Mount 3d printed

Not a Photo

Black PA12
Look 795 RS MY22 Garmin Varia Mount 3d printed
Look 795 RS MY22 Garmin Varia Mount 3d printed

Not a Photo

Look 795 RS MY22 Garmin Varia Mount

Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
If you have issues with shreading the insides of your biking shorts because of a narrow stance and mounts that use bolts on the sides, here is a design that works. A single bolt placed on the rear side of the clamp moves it out of the way and prevents scrapping of your inner thighs. This mount is size specific for the LOOK 795 RS MY2022 seat posts (It may fit other years, contact LOOK for details). This mount is not for the  Garmin RCT715.

Required Hardware (not included):
  • 1 - M5 X 16 - 18 mm (5 mm x 16/18 mm) socket head cap screw
  • 1- M5 (5 mm) nylon insert lock nut

Suggested installation method
  1. Mark the height of your seat post and remove it from the frame.
  2. Install the mount by inserting from the bottom of the post and sliding it up.
  3. Reinstall the seat post
  4. Move the Varia mount to the desired location and insert an M5 X 12/14/16 mm (5 mm X 12/14/16 mm) socket head cap screw and an M5 (5 mm) nylon insert lock nut in the recesses on both sides of the mount.
  5. Tighten the screw, please do not torque it down tight, it only needs to be as tight as necessary to hold it in place.
  6. Mount the Varia and RIDE!

Note: Please do not try to test fit your device before attaching your mount to your bicycle, it is a tight fit and may not fully seat or be removed as there is not enough leverage without mounting it in it's proper location.

This product is not endoresed by Garmin Ltd or LOOK Cycle International SAS . All trademarks are owned by their prespective rights holder. No warranties expressed or implied as to fitness for purpose.
What's in the box:
Look 795 RS Varia Mount MY22 v2
7.93 x 3.32 x 3.5 cm
Switch to inches
3.12 x 1.31 x 1.38 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.