White Natural Versatile Plastic
TF CW Arm Cannon adapter Set of 2
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$6.72
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Upgrade your Transformers Combiner Wars figures with additional ports for Arm Cannons or other accessories
Give your Galvatronus or Grand Galvatron a proper arm cannon.
This adapter will work with several figures including
This will also work with the Combiner Wars Air Raid and its variants (Guyhawk, Strafe, etc.) but will sit higher up on the arm. This has a 5mm port and works with standard Transformers weapons. This part will also work great with War for Cybertron Modulator Figures Such as Airwave, Ironworks, Cog, etc.
To attach, transform this into arm mode and attach to the tab on the combiner forearm mode. (It may be easier to attach while partially transformed.) There are 2 slots on the part, allowing you to mount it on middle of the adapter or offset.
This is intended for adult figure collectors. This is not designed for rough play by children.
This is a set of 2 parts that are connected. You will need to cut them to separate and trim off excess plastic using plastic cutters or a hobby knife.
This was tested with my home printer, printed in PLA plastic. When fitting the part press firmly and evenly. Do not force the part on, you risk cracking the pieces. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
THis has been successfully printed in Natural Versatile Plastic
Give your Galvatronus or Grand Galvatron a proper arm cannon.
This adapter will work with several figures including
- Combiner Wars Skydive
- Combiner Wars G2 Skydive
- Combiner Wars Slingshot
- Combiner Wars Firefly
- Combiner Wars Blastoff
- Unite Warriors Ghost Starscream,
- Takaratomy Golden Lagoon Starscream
- Combiner Wars Hellbat
This will also work with the Combiner Wars Air Raid and its variants (Guyhawk, Strafe, etc.) but will sit higher up on the arm. This has a 5mm port and works with standard Transformers weapons. This part will also work great with War for Cybertron Modulator Figures Such as Airwave, Ironworks, Cog, etc.
To attach, transform this into arm mode and attach to the tab on the combiner forearm mode. (It may be easier to attach while partially transformed.) There are 2 slots on the part, allowing you to mount it on middle of the adapter or offset.
This is intended for adult figure collectors. This is not designed for rough play by children.
This is a set of 2 parts that are connected. You will need to cut them to separate and trim off excess plastic using plastic cutters or a hobby knife.
This was tested with my home printer, printed in PLA plastic. When fitting the part press firmly and evenly. Do not force the part on, you risk cracking the pieces. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
THis has been successfully printed in Natural Versatile Plastic
Details
What's in the box:
Galvatronus Arm adapter
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
