1/200 Scale Royal Navy 32ft Cutters x2. Very high detailed boat set ideal for most WW1 and WW2 British warship kits. Ideal for the 1/200 HMS Hood. These are modelled based on the Norman Ough Plans and the excellent photographic reference at
www.finewaterline.org. See My Shop for other scales and 1 Boat version.
Details include:
- Ribs
- Floor Boards
- Rising, Gunwale, Rubbing Timber and Capping
- Keel and Bilge Rails
- Rudder with steering mechanism
- Mounts are printed separately in case Cutters are to be stored on Davits
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation