Bernal Space Station for High Frontier boardgame (or anything else you fancy).
Two set "sizes" :
-
Small :
2 bernals (various colours)
-
Large :
10 bernals (white only)
Select the desired size in the top-right menu.
Parts are attached with a wire (just cut the wire and they fall).
Dimensions are 42mm high, 20mm wide (1.65" h, 0.8" w)
It has a 3mm diameter (0.12") hole under to fit on a fight stand
(Litko, stuff4games, Hawk Wargames, or equivalent).
It can also be put directly on the board.
Check the High Frontier and Fleet Commander sections of my shop for more S-F stuff.
The model comes unpainted. It has a single colour.
If you want to paint it, the process is almost identical to any regular plastic miniature. Some recommendations:
- With White Plastic : Wash the model, to remove any remaining nylon powder. Use soapy water, rub with toothbrush, rinse, let dry. Spray prime (you can apply more primer coats than usual, though), paint, spray varnish.
- With Fine Detail Plastic only : Wash the model, to remove any remaining wax. Approx. 3 minutes in acetone, or approx. 30 minutes in denaturated alcohol, or approx. 30 minutes in Simple Green. Rub gently with a toothbrush, rinse with water, let dry. Spray prime, paint, spray varnish.
Note :
Due to manufacturing tolerances, the 3mm hole might need some rework to fit nicely on the flight stand's peg.
The flight stand is
not included, of course.