Purple Processed Versatile Plastic
Bontrager GoPro/Flare Combo Saddle Mount
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$39.37
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
If you own a Bontrager saddle with the built in Blendr mounting holes then you can use this attachment to mount both a Bontrager Flare or Ion taillight and a GoPro (or compatible) style camera to that saddle. Custom fit to the underside of all new Bontrager saddles that are equiped with Blendr mounting holes.
Required Hareware (not included):
2 - M5 x 10 mm (5 mm x 10 mm) socket or button head screws
Mounting Instructions:
Compatible Bontrager saddles will either already have the bolts exposed or will have a plastic cover over the screw mounting holes. These holes are located between the saddle rails, at the rear edge of the saddle. Remove the cover. Place this mount (outward angle facing rearward) over the holes and using two M5 x 10 mm bolts, secure it to the bottom rear section of the saddle.
Multi Jet Fusion PA12 vs Versatile Plastic, why choose MJF PA12?
All 3D prints are made from the same raw white Nylon materials. Black Natural Versatile Plastic is a print that comes straight out of the printer, is cleaned and then placed in a black dye bath. Black Natural Versatile Plastic is not polished or surface finished in any other manner. The result is a grainy/fuzzy surface texture. All other Versatile Plastic parts are polished before dyeing and have a satin sheen as a result of the polishing process. MJF PA12 starts with similar raw material and a liquid binder (gray) resulting in more even and saturated color when dyed. MJF PA12 has a matte finish and slight grainy feel. The technology used in MJF PA12 produces a stronger print.
This product and/or service is not affiliated with, endorsed by or in any way associated with GoPro Inc. or its products and services. GoPro, HERO and their respective logos are trademarks or registered trademarks of GoPro, Inc.
Required Hareware (not included):
2 - M5 x 10 mm (5 mm x 10 mm) socket or button head screws
Mounting Instructions:
Compatible Bontrager saddles will either already have the bolts exposed or will have a plastic cover over the screw mounting holes. These holes are located between the saddle rails, at the rear edge of the saddle. Remove the cover. Place this mount (outward angle facing rearward) over the holes and using two M5 x 10 mm bolts, secure it to the bottom rear section of the saddle.
Multi Jet Fusion PA12 vs Versatile Plastic, why choose MJF PA12?
All 3D prints are made from the same raw white Nylon materials. Black Natural Versatile Plastic is a print that comes straight out of the printer, is cleaned and then placed in a black dye bath. Black Natural Versatile Plastic is not polished or surface finished in any other manner. The result is a grainy/fuzzy surface texture. All other Versatile Plastic parts are polished before dyeing and have a satin sheen as a result of the polishing process. MJF PA12 starts with similar raw material and a liquid binder (gray) resulting in more even and saturated color when dyed. MJF PA12 has a matte finish and slight grainy feel. The technology used in MJF PA12 produces a stronger print.
This product and/or service is not affiliated with, endorsed by or in any way associated with GoPro Inc. or its products and services. GoPro, HERO and their respective logos are trademarks or registered trademarks of GoPro, Inc.
Details
What's in the box:
Bontrager - Flare - GoPro Combo Saddle Mount v1
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
