Black PA12
Trek Madone SL Cycliq FLY6ce Insert
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$31.98
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Mount your Cycliq FLY6ce taillight / action cam in the perfect spot on your Trek Madone Series 9 bicycle.
Insert replaces Flare taillight or standard reflector insert. To use, disassemble the Flare/Reflector Madone mount using a 2.5 mm hex allen key, insert this item and place an M4 nylon insert locking washer in place on the front. Replace the M4 x 10 mm button head cap screw with a M4 x 12 mm button head cap screw. Mount on your Madone as usual.
Why are there two choices for black?
All 3D prints are made from the same raw Nylon materials. Black Natural Versatile Plastic is a print that comes straight out of the printer, cleaned and then is simply placed in a dye bath. Black Natural Versatile Plastic is not polished or surface finished in any manner. The result is a grainy/fuzzy surface texture. Professional plastic starts with colored raw material (either Gray and Black) resulting in more even and saturated color. Professional Plastic uses a newer process that produced a slightly stronger print. Professional Plastic and has a smooth semi-gloss finish.
Required parts (not included):
Does not fit Madone SLS series.
Insert replaces Flare taillight or standard reflector insert. To use, disassemble the Flare/Reflector Madone mount using a 2.5 mm hex allen key, insert this item and place an M4 nylon insert locking washer in place on the front. Replace the M4 x 10 mm button head cap screw with a M4 x 12 mm button head cap screw. Mount on your Madone as usual.
Why are there two choices for black?
All 3D prints are made from the same raw Nylon materials. Black Natural Versatile Plastic is a print that comes straight out of the printer, cleaned and then is simply placed in a dye bath. Black Natural Versatile Plastic is not polished or surface finished in any manner. The result is a grainy/fuzzy surface texture. Professional plastic starts with colored raw material (either Gray and Black) resulting in more even and saturated color. Professional Plastic uses a newer process that produced a slightly stronger print. Professional Plastic and has a smooth semi-gloss finish.
Required parts (not included):
- 1 - TREK part number W516121 or Trek Rear Reflector Mount (both supplied with the Madone 9 series)
- 1 - M4 x 12 mm button head cap screw
- 1 - M4 nylon insert lock nut
Does not fit Madone SLS series.
Details
What's in the box:
Madone FLY6ce Insert
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
