1/96 Royal Navy Small Depth Charge Racks x2
1/96 Royal Navy Small Depth Charge Racks x2
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$27.92
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/96 Scale Royal Navy Small Depth Charge Racks x2 (Port and Starboard). These Racks were used on many Warships during WW2 including many types of Destroyer and Cruiser (please check your plans or reference). This set also contains 6 Depth Charges for the stowage on the Racks. Also available are single Small Depth Charge Racks also ideal for a variety of British Warships where only 1 Rack was used.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
- 2x Depth Charge Racks (Port and Starboard)
- Highly detailed, based on the John Lambert plans.
- Accurate Hex Nuts, L-Bar shape, Runners and release mechanism
- Comes with 6 MKVII Depth Charges
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
96 British Small Depth Charge Rack x2 Sprue
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
