1:144 G Eason.stl
1:144 G Eason.stl
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$140.60
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Highly detailed 1/144 Scale Royal Navy WW2 Boat Set without mounts. Modelled off plans and all available photographic reference. Many hours have been spent modelling this set and I'd like to thank The British Military Motor Boat Association for their invaluable reference.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
- Contains the following boats:
- 1x 45ft Medium Picket Boat
- 1x 45ft Fast Motor Launch
- 1x 35ft Seaplane Tenders
- 1x 35ft Fast Motor Launch
- Boat detail includes decking, cleats, rudders, seating inside all boats, portholes, windows etc.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
1:144 G Eason.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
