TF Earthrise Wheeljack Wing Set
Made by
Print With Shapeways
Choose Your Size
Choose Your Material
Choose your color and finish
Choose Your Size
$7.03
Choose Your Material
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a set of wings for Transformers War for Cybertron Earhtrise/Kingdom Wheeljack, Generations Selects Exhasut, and Shattered Glass Slicer.
This is a simple 2 piece design. They fit into the existing 5mm ports. They rotate in the ports to swing out and form wings in robot mode. They rotate inward to form a car spoiler/wing for car mode. Rectangular Slots are added to the sides of the spoiler so that you can mount Wheeljack's shoulder weapons while in vehicle mode.
You don't need to remove the parts for transformation. They designed so there's enough clearance to rotate them without removal. Rotate the one underneath a tiny bit, then the one on top a tiny bit and then rotate the one underneath fully. Finish rotating the one on top fully.
Choose Small for 1 Set of Wings
Choose Medium for 2 Sets of Wings
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
For Additional Wheeljack Tools/Accessories, Please see my other product here:
https://www.shapeways.com/product/ZSHVYFASM/tf-cw-earthrise-wheeljack-tools-set?optionId=288032347&li=shops
This is a simple 2 piece design. They fit into the existing 5mm ports. They rotate in the ports to swing out and form wings in robot mode. They rotate inward to form a car spoiler/wing for car mode. Rectangular Slots are added to the sides of the spoiler so that you can mount Wheeljack's shoulder weapons while in vehicle mode.
You don't need to remove the parts for transformation. They designed so there's enough clearance to rotate them without removal. Rotate the one underneath a tiny bit, then the one on top a tiny bit and then rotate the one underneath fully. Finish rotating the one on top fully.
Choose Small for 1 Set of Wings
Choose Medium for 2 Sets of Wings
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
For Additional Wheeljack Tools/Accessories, Please see my other product here:
https://www.shapeways.com/product/ZSHVYFASM/tf-cw-earthrise-wheeljack-tools-set?optionId=288032347&li=shops
Details
What's in the box:
TF Earthrise WJ Wing Set
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
