Gray PA12
Servo On Axle and 4 Link V2 for Redcat Portal
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$21.28
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Also available at 1tenth.com
V1.1 Updates - Material removal mainly. Widened the screw holes, shrunk the servo tabs by 1mm, and added some slots to the top. This will make install a little easier and saved about $1.
V2 Updates - Cosmetic only.
Fits V1 and V2 Axles
Since not everyone can swing a ~$35 metal adapter we whipped up a 2nd model that's nylon friendly. We added more material to make sure it holds up to the test of time. This one has an additional side brace that hooks up to the panhard mount. This ensures there's no side to side wiggle.
You'll need some longer M2 screws through the mount into the front of the diff, and one long M3 to hook the links up to the back. Nothing special needed for the servo, just slap some M3 screws in.
Using this with a stock Gen8 won't be plug n play. The motor gets in the way. You might be able to get by with a 540, Holmes Revolver, or a Puller Pro Stubby. Intended for people doing custom builds. Anything is possible though.
V1.1 Updates - Material removal mainly. Widened the screw holes, shrunk the servo tabs by 1mm, and added some slots to the top. This will make install a little easier and saved about $1.
V2 Updates - Cosmetic only.
Fits V1 and V2 Axles
Since not everyone can swing a ~$35 metal adapter we whipped up a 2nd model that's nylon friendly. We added more material to make sure it holds up to the test of time. This one has an additional side brace that hooks up to the panhard mount. This ensures there's no side to side wiggle.
You'll need some longer M2 screws through the mount into the front of the diff, and one long M3 to hook the links up to the back. Nothing special needed for the servo, just slap some M3 screws in.
Using this with a stock Gen8 won't be plug n play. The motor gets in the way. You might be able to get by with a 540, Holmes Revolver, or a Puller Pro Stubby. Intended for people doing custom builds. Anything is possible though.
Details
What's in the box:
SOA Mount - w Ears - Stationary
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
