This is a set of parts that converts Miner Megatron's drill weapon into his classic Fusion Cannon weapon. This consists of 1 Cannon Muzzle, 1 Cannon Back end and one spacer for the arm. This connects with 5mm ports and pegs, making additional combinations with other transformers possible. It can also work with Seige Blast effects.
To install, in robot mode, remove the drill and attach the Cannon parts. Muzzle Goes on the front of the Drill Body. Back end goes onto the back end of the Drill Body. The Spacer goes onto the peg.
Choose Small for a Version with Extra 5mm ports (Intended for combinations with Modulators)
Choose Medium for a standard version
To install in tank mode, remove the cannon muzzle and back end. Install the parts onto Megatron's tank turret. The Spacer does not need to be removed from teh Drill body. You will need the shaft part of the miner pick axe for the Tank Mode.
This is intended for adult figure collectors. This is not designed for rough play by children.
These parts are connected. You will need to separate them and trim off excess plastic with a hobby knife or plastic cutters. I highly recommend test fitting parts and prior to installation.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
For a complete Fusion Cannon, please see my other product here:
https://www.shapeways.com/product/Q92U2KWN4/tf-siege-tyrant-fusion-cannon