This is a ramp adapter for Seige and Earthrise base mode transformers. This allows you to creaate a raised bridge with ramp segments. The bridge sections raise the ramp sections 30 mm off the ground. This is tall enough to allow Micromaster transformers to pass underneath. You can stack brige supports on top of each other to create ramps that are raised 60 mm off the ground. Parts connect using 5mm ports and 5mm pegs. This will allow you to have more interesting base mode layouts when you connect your transformers together.
This is a set of 6 pieces. 2 Ramp connectors and 4 bridge supports. You will need to separate the parts and trim off the excess plastic.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has successfully been printedin Shapeways Natural Versatile Plastic and Processed Versatile Plastic.
For the straight adapter, visit my other design here:
https://www.shapeways.com/product/H4R9M56QT/tf-titans-return-to-earthrise-straight-ramp?optionId=153743478&li=shops
For the angled adapter, visit my other design here:
https://www.shapeways.com/product/Z8M2VTMSG/titan-return-to-earthrise-ramp-triangle-adapter
For the Hex Adapter, visit my other design here:
https://www.shapeways.com/product/PHB4V4JWV/tf-earthrise-hex-ramp-adapter?optionId=162662139&li=marketplace