Cardassian Keldon Class 1/4800 Attack Wing

Original length: 371.88m ("The Official Starships Collection", Issue No. 14)
Scale: 1/4800
Alternate Scale: approx. 1/6200 at a length of 481m
Mounting hole: Attack Wing, small
Requested by: Xikorolkel

This is the Cardassian Keldon Class, basically an updated version of the Galor Class. The original studio model was altered with additional parts that where removable, so it was possible to revert it and use it in the original form also. As with the Galor Class, i originally used a length of 481m for this, based on a statement by Ed Miarecki that ithe Galor was supposed to be ¾ the length of a Galaxy Class. This figure fitted well to some scenes seen in DS9. However, i changed the length to 371.88mm as printed in the DS9 Technical Manual and also used by Eaglemoss for the "Official Starship Collection". This seems to be a good compromise between the 368m that was used for the CG version of the Galor Class from later seasons of DS9 and the 379.6m Rick Sternbach sees as his intended design size, based on an average deck hight of approx. 3.8m (memory-alpha). I also made this decision because the Klingon Vor'cha also has a length of 481m and it might be that Ed Miarecki has confused the two designs regarding the length. If you still believe in the bigger size i also give the approx. scale for the 481m version above.

If you need this in another material, size, or quantity, send me a message. I will try to make it as you need. Be sure to read my comments below my shop page first.