HD Tree Kickers/Sliders/Nerf Bars for Axial Capra
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$53.30
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
These pieces will screw into the outside of the cage and give some protection against getting a tree or other obstacle wedged between your wheel and chassis. The outer most edge flates out to about 30MM of extra width from the factory cage.
It will attach at 4 different points. 2 of which are M3 from the factory and the other 2 are M2.5 for the body panels. We suggest using M3 for all of them but you can get away with longer M2.5 if you're not bashing it hard. If possible back with a nut on the inside.
Front screw will need to be ~15MM long with a nut
Lower "middle" screw will need to be ~35MM long with a nut
"Middle" Back screw will need to be ~40MM without a nut
Top Screw will need to be ~7MM longer than OEM screw
It will attach at 4 different points. 2 of which are M3 from the factory and the other 2 are M2.5 for the body panels. We suggest using M3 for all of them but you can get away with longer M2.5 if you're not bashing it hard. If possible back with a nut on the inside.
Front screw will need to be ~15MM long with a nut
Lower "middle" screw will need to be ~35MM long with a nut
"Middle" Back screw will need to be ~40MM without a nut
Top Screw will need to be ~7MM longer than OEM screw
Details
What's in the box:
CapraHDTreeKicker-Both-Shapeways
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
