Combined with Hex Ramp Adapter
TF Seige Earthrise Kingdom Ramp Bridge Supports
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$21.60
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a set of 6 bridge supports for Earthrise/Seige/Kingdom ramps. This allows you to creaate a raised bridge and docs . The bridge supports raise the ramp sections 30 mm off the ground. This is tall enough to allow Micromaster transformers to pass underneath. You can stack bridge supports on top of each other to create taller bridges. Parts connect using 5mm ports and 5mm pegs. These parts are compatible with all my previous Earthrise/Seige/Kingdom ramp parts and adapters (Sold separately). This will allow you to have more interesting base mode layouts when you connect your transformers together.
This is a set of 6 bridge supports. You will need to separate the parts and trim off the excess plastic.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Natural Versatile Plastic
For the straight adapter, visit my other design here:
https://www.shapeways.com/product/H4R9M56QT/tf-titans-return-to-earthrise-straight-ramp?optionId=153743478&li=shops
For the angled adapter, visit my other design here:
https://www.shapeways.com/product/Z8M2VTMSG/titan-return-to-earthrise-ramp-triangle-adapter
For the Hex Adapter, visit my other design here:
https://www.shapeways.com/product/PHB4V4JWV/tf-earthrise-hex-ramp-adapter?optionId=162662139&li=marketplace
For the Bridge Adapter Set, visit my other design here:
https://www.shapeways.com/product/C2DTQ638W/tf-seige-earthrise-bridge-ramp-adapter-set?optionId=210715135&li=shops
This is a set of 6 bridge supports. You will need to separate the parts and trim off the excess plastic.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Natural Versatile Plastic
For the straight adapter, visit my other design here:
https://www.shapeways.com/product/H4R9M56QT/tf-titans-return-to-earthrise-straight-ramp?optionId=153743478&li=shops
For the angled adapter, visit my other design here:
https://www.shapeways.com/product/Z8M2VTMSG/titan-return-to-earthrise-ramp-triangle-adapter
For the Hex Adapter, visit my other design here:
https://www.shapeways.com/product/PHB4V4JWV/tf-earthrise-hex-ramp-adapter?optionId=162662139&li=marketplace
For the Bridge Adapter Set, visit my other design here:
https://www.shapeways.com/product/C2DTQ638W/tf-seige-earthrise-bridge-ramp-adapter-set?optionId=210715135&li=shops
Details
What's in the box:
Ramp Supports
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
