You must be logged in and verified to contact the designer.
Product Description
Same basic design as our 1 Piece version but we kept the brace seperate just in case you're the full send high voltage crank it in a bind type, but don't want metal. This one will allow you to replace inidividaul pieces if you have any breakage.
This one is a ground up design and ditches the panhard brace all together. We added a "truss extension" to brace the mount against the axle, providing even more rigidity.
Similar to our V2.3 mount this one still uses the driver side shock mount as a side brace to keep wiggle to minimum.
You'll need: M3x45-50MM with nut for the upper link mounts 4 x M3x~15MM with nuts for the servo
1MM Longer screw for shock mount (kind of optional, highly suggested)
NOT PLUG N PLAY WITH STOCK CHASSIS. INTENDED FOR CUSTOM CHASSIS. EXPERIENCED BUILDERS ONLY WITH STOCK CHASSIS
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: