1/285 (6mm) Russian Ural Typhoon 63095 MRAP x2

1/285 (6mm) Scale Russian Ural Typhoon 63095 MRAP Infantry Mobility Vehicle, contains 2 highly detailed Vehicles.

Ural Typhoon 63095 MRAP Infantry Mobility Vehicle
Ural Typhoon is Russia's multi-functional, modular, armoured, mine resistant vehicle family. The chassis consists of the car bonnet, frame, three-axle drive, bonneted frame and chassis.[1] The Typhoon is part of Russia's large vehicle Typhoon program.

Can be used as reconnaissance, command and staff vehicles, machinery EW / RTR or communications, ambulance or to conduct engineering, radiation, chemical and biological reconnaissance of transportation.

Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.

Let your parts sit in direct sunlight for a few hours to fully cure the resin.  
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.      

Painting tips and preparation