Polished Bronzed-Silver Steel
Metal Panhard Mount - Axial Capra Axle
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$64.27
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Simiilar design to our Nylon version, just a bit more clearence added to the holes. This piece allows you to use the Axial Capra Currie Portal Axles with a CMS/3-Link/Panhard setup. It sandwhiches the truss, small piece in front and big piece in back. The thick width makes it work with different wheelbase lengths.
You'll need some M3 Screws and Nuts to mount to the axle truss. Then a M3 Screw and Nut to secure the panhard link to the mount.
Shapeways states +/- 5% tolerances with their metal printing process. You might need to do a little trimming with a dremel in some spots. Nothign major though. They're proud of the process too as we only make about $3 off this, the rest goes to Shapeways.
You'll need some M3 Screws and Nuts to mount to the axle truss. Then a M3 Screw and Nut to secure the panhard link to the mount.
Shapeways states +/- 5% tolerances with their metal printing process. You might need to do a little trimming with a dremel in some spots. Nothign major though. They're proud of the process too as we only make about $3 off this, the rest goes to Shapeways.
Details
What's in the box:
Capra Metal Panhard Mount
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
