TF G1 Countdown Articulated Large Double Laser
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$10.00
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a replacement for Transformers Generation 1 Micromaster Countdown Large Double Laser.
This is not an exact replica of the original, but it is very faithful to the original design. This articulated design allows the laser to aim upwards ~60 degress. The laser barrels have 3mm pegs allowing for connection with Seige Blast Effects. The base of the laser connects with a 5mm peg, making it compatible with many transformers. These make excellent upgrades to your Base Mode Transformers as well.
This is sold as 1 kit to form 1 large double laser. It comes as 4 pieces connected together; 1 double laser, 2 pivot pegs and 1 base. You will need to cut them to separate them and trim off the excess plastic.
Assembly
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
For the Micromaster Ramps, please see my other design here:
https://www.shapeways.com/product/47TMQ2AN7/tf-g1-countdown-micromaster-to-seige-ramp?optionId=303448294&li=shops
This is not an exact replica of the original, but it is very faithful to the original design. This articulated design allows the laser to aim upwards ~60 degress. The laser barrels have 3mm pegs allowing for connection with Seige Blast Effects. The base of the laser connects with a 5mm peg, making it compatible with many transformers. These make excellent upgrades to your Base Mode Transformers as well.
This is sold as 1 kit to form 1 large double laser. It comes as 4 pieces connected together; 1 double laser, 2 pivot pegs and 1 base. You will need to cut them to separate them and trim off the excess plastic.
Assembly
- Test the Pivot Pegs; ensure they turn in the 5mm hole in the base. It should be able to turn with a little pressure; not so tight it is stiff and difficult to turn. This can be tightened with Floor polish or Nail Topcoat. This can be loosened with sanding
- Insert the base into the double laser and align 5mm holes.
- Insert the pivot pegs into the holes. The pivot pegs should hold firmly in the double laser, however, it should be able to turn in the base.
- Insert Base's 5mm peg into your Transformer.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
For the Micromaster Ramps, please see my other design here:
https://www.shapeways.com/product/47TMQ2AN7/tf-g1-countdown-micromaster-to-seige-ramp?optionId=303448294&li=shops
Details
What's in the box:
Countdown Turret Kit
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
