Original length: 736.5m (Compared to the Enterprise from the same movie at her original design size)
Scale: 1/1400
Alternate Scale: Approx. 1/2770 at 1459m
Mounting hole: None
Cost reduction: Hollow, 4mm wall thickness. Cut into 4 pieces, with sockets and pins to help assemble them. One additional escape hole on the underside of the saucer. Needs to be glued together, some sanding and fitting might be required. When assembled, the model will be about 526mm (20.7 in) long.
Requested by: summer072077
Although Khan calls the USS Vengeance "Dreadnought Class", naming traditions in Star Trek (which are following naval traditions) demands that the first vessel put in service becomes the class-ship. I doubt that there was a USS Dreadnought built before the Vengeance, which was built in secret... in the sol system... probably one of the systems with the most traffic volume in the Federation... and Admiral Marcus does have a model of it on his desk... well, yeah. I think, Kahn actually meant the type of vessel, a dreadnought (like the Enterprise is a heavy cruiser), therefore this is actually the Vengeance Class.
The official size is 1459m. This is based on the fact that the ship is about two times the length of the Enterprise, which has an official length of 725m. Well, i do not accept this ridiculously huge size for the latter and therefore i list the Kelvin Timeline (KTL) Constitution Class in my shop with the much more reasonable original design size for the 3D-model of 366m. Based on this size, the Vengeance is "just" 736.5m long (still larger than a Galaxy Class), so i list it with this size but also give an alternate scale for the official length too. This way, if you buy the Vengeance and the Enterprise in my shop at the same scale, they match each other in relative size.
If you need this in another material, size, or quantity, send me a message. I will try to make it as you need. Be sure to read
my comments below my shop page first.