Clear Ultra Fine Detail Plastic
1/600 Russian 2S14 Zhalo-S Tank Destroyer x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$20.13
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/600 Scale Modern Russian 2S14 Zhalo-S Tank Destroyer.
Contains 10 highly detailed tanks.
Contains:
2S14 Zhalo-S Tank Destroyer
Designed by the Soviet Union, this armored personnel carrier was devised as an experiment that added tank destroyer capabilities to a troop transport. The Zhalo-S incorporates various features from the BTR-70, such as lower doors that gives troops more coverage when exiting the vehicle. As the gun lacked penetration power against modern tanks, the vehicle did not enter production.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains 10 highly detailed tanks.
Contains:
- 10x 2S14 Zhalo-S Tank Destroyers
2S14 Zhalo-S Tank Destroyer
Designed by the Soviet Union, this armored personnel carrier was devised as an experiment that added tank destroyer capabilities to a troop transport. The Zhalo-S incorporates various features from the BTR-70, such as lower doors that gives troops more coverage when exiting the vehicle. As the gun lacked penetration power against modern tanks, the vehicle did not enter production.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
600 2S14 Zhalo-S X10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
