3d render showing product detail
1/600 Russian BMP-3M Dragun 57 IFV x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$21.23
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/600 Scale Modern Russian BMP-3M Dragun 57 Infantry Combat Vehicle x10.
Contains:
BMP-3M Dragun 57 Infantry Combat Vehicle
KBP and Kurganmashzavod have upgraded the vehicle with a new turret and engines. The upgraded vehicle is called the BMP-3M and the new turret includes a new automatic fire control system with ballistic computer, new SOZH gunner's sight with laser rangefinder and an ATGM guidance channel, thermal imager, TKN-AI commander's vision device with laser illuminator and new ammunition loading system for ATGM.[17] The BMP-3M is also able to fire various ammunition types, including new 100 mm laser-guided projectiles, new 100 mm HE-FRAG (high explosive fragmentation) rounds and new 30 mm APDS (armour piercing discarding sabot) rounds. Additional passive armour protection is effective against 12.7 mm armour-piercing rounds from a range of 50 m. Explosive reactive armour is available as an option. The new uprated engine is the UTD-32, which is rated at 660 hp.[18] There are actually several different M models, some fitted with additional armour, "Arena-E" or "Shtora-1" protection system, air conditioner etc..
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains:
- 10x BMP-3M Dragun 57 Infantry Combat Vehicles
BMP-3M Dragun 57 Infantry Combat Vehicle
KBP and Kurganmashzavod have upgraded the vehicle with a new turret and engines. The upgraded vehicle is called the BMP-3M and the new turret includes a new automatic fire control system with ballistic computer, new SOZH gunner's sight with laser rangefinder and an ATGM guidance channel, thermal imager, TKN-AI commander's vision device with laser illuminator and new ammunition loading system for ATGM.[17] The BMP-3M is also able to fire various ammunition types, including new 100 mm laser-guided projectiles, new 100 mm HE-FRAG (high explosive fragmentation) rounds and new 30 mm APDS (armour piercing discarding sabot) rounds. Additional passive armour protection is effective against 12.7 mm armour-piercing rounds from a range of 50 m. Explosive reactive armour is available as an option. The new uprated engine is the UTD-32, which is rated at 660 hp.[18] There are actually several different M models, some fitted with additional armour, "Arena-E" or "Shtora-1" protection system, air conditioner etc..
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
600 BMP-3M Dragun 57 10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
