Gray PA12
TF TR Fortress Single Matrix Holder
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$14.17
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is an upgrade for your Transformers Titans Return Fortress Maximus or Grand Maximus. It holds 1 Prime Master in Matrix Mode. The part fills a gap in the chest compartment. I have also added 5mm ports for additional combination possibilities with other transformers.
To install, open the red door that is on the top of Fortress Maximus' torso. Insert the part into the opening. Push the part forward through the gap from the back. The part will stay in place with friction.
This is intended for adult figure collectors. This is not designed for rough play by children.
Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been tested with my home 3D printer with PLA Plastic.
Thias has been successfullly printed in Shapewas Gray PA12 Glass Beads.
For a Double Matrix Holder, Please see my other product here:
https://www.shapeways.com/product/HV4K85ZA6/tf-tr-titan-fortress-double-matrix-holder
For a set of replacement parts for Fortress Maximus' head crest, please see my other product here:
https://www.shapeways.com/product/7CV6GZN87/tf-tr-fort-max-head-crest-replacement?optionId=240394051&li=shops
For the Handle Retainer for Metroplex's Red Cannon, please see my other product here:
https://www.shapeways.com/product/GL3ATCTJX/tf-generations-titan-rifle-handle-retainer?optionId=176624363&li=shops
If you need replacement shoulder ramps for Fortress Maximus, Please see my other product here:
https://www.shapeways.com/product/536632SNH/tf-tr-fort-max-shoulder-replacement-ramp
To install, open the red door that is on the top of Fortress Maximus' torso. Insert the part into the opening. Push the part forward through the gap from the back. The part will stay in place with friction.
This is intended for adult figure collectors. This is not designed for rough play by children.
Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been tested with my home 3D printer with PLA Plastic.
Thias has been successfullly printed in Shapewas Gray PA12 Glass Beads.
For a Double Matrix Holder, Please see my other product here:
https://www.shapeways.com/product/HV4K85ZA6/tf-tr-titan-fortress-double-matrix-holder
For a set of replacement parts for Fortress Maximus' head crest, please see my other product here:
https://www.shapeways.com/product/7CV6GZN87/tf-tr-fort-max-head-crest-replacement?optionId=240394051&li=shops
For the Handle Retainer for Metroplex's Red Cannon, please see my other product here:
https://www.shapeways.com/product/GL3ATCTJX/tf-generations-titan-rifle-handle-retainer?optionId=176624363&li=shops
If you need replacement shoulder ramps for Fortress Maximus, Please see my other product here:
https://www.shapeways.com/product/536632SNH/tf-tr-fort-max-shoulder-replacement-ramp
Details
What's in the box:
Fortress Maximus Single Matrix Holder
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
