Redcat Portal Servo on Axle and 4 Link adapter

​Since not everyone can swing a ~$35 metal adapter we whipped up a 2nd model that's pastic friendly.

Here's a version of our Servo on Axle adapter without the servo ears.  This one will let you use the servo mount of your choice.  You'll have to drill holes but there's plenty of room so just about any servo mount kit should fit.  We suggest drilling 2.5mm-2.7mm holes to make sure you have a lot of bite.

 Since plastic isn't quite as stout as the metal we added a lot more material to make sure it holds up to the test of time.  This one has an additional side brace that hooks up to the panhard mount.  This ensures there's no side to side wiggle.  

You'll need some longer M2.5 screws to mount to the front of the diff and one long M3 to hook the links up to the back.  Nothing special needed for the servo, just slap some M3 screws in.

Using this with a stock Gen8 won't be plug and play...  The motor gets in the way.  You might be able to get by with a 540, Holmes Revolver, or a Puller Pro Stubby.  Mainly geared towards custom builders.  Anything is possible thought :)