Smooth Fine Detail Plastic
HO Eureka Models D50 Funnel
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$9.07
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a replacement funnel for the Eureka Models NSWGR D50 Class Steam Locomotive.
This funnel has the bolts around the flange unlike the model funnel and is the correct height. The June 2016 Australian Model Railway Magazine review of the Eureka Models D50 Class stated that the funnel was 2 inches too high. This is possbily due to the need to have a thicker than possible flange where the funnel meets the boiler. This funnel has been adjusted so that the height has been set from the underside of the flange to the top of the funnel (within the limits of the printing process).
This funnel has the bolts around the flange unlike the model funnel and is the correct height. The June 2016 Australian Model Railway Magazine review of the Eureka Models D50 Class stated that the funnel was 2 inches too high. This is possbily due to the need to have a thicker than possible flange where the funnel meets the boiler. This funnel has been adjusted so that the height has been set from the underside of the flange to the top of the funnel (within the limits of the printing process).
Details
What's in the box:
HO Eureka Models NSWR D50 Funnel
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
