DNA75 Color DNA75C Mounting Plate

Mounting plate for mounting the DNA75C board + screen inside the case.  Requires 3x #0 screws to mount the board to the plate.  

Insert the screen through the plate's slot from the back side of the plate to the front, slide screen to the edge of the screen guide (if the screen doesn't stay put, apply a piece of double-sided tape to the side edges of the underside of the screen), tuck entire cable under plate, screw the board to the plate.  

To seat the mounting plate flush with the inside wall of the case, use button actuators with a 1mm thick flange (all my DNA button sets have a 1mm thick flange).

Either epoxy the plate to the inside wall of the case, or purchase 3x #0-80 12.7mm long screws with a nut, insert the screws through the front of the case to the back of the board, attach the nut (must drill holes in the case that align with the screws of the DNA75C board).