Gray PA12
TF TR Neck Adapter for Kingdom Fire Truck
Made by
Print With Shapeways
Choose Your Size
Choose Your Material
Choose your color and finish
Choose Your Size
$7.00
Choose Your Material
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a Neck adapter designed for the Transformers Kingdom Inferno, Earthrise Grapple, Kingdom Artfire and Legacy Road Hauler. This replaces the head and neck of the original figure and creates a port for using Titans Return Titan Master Figures. This replacement piece does not interfere with the transformation. You can leave the head attached and transform the robot.
Choose Small for 1 adapter
Choose Medium for 2 adapters
To install, Transform the figure into Robot Mode. Unplug the head and neck from the rectangular port on the back of the robot. Gently pull away thsides of the head from the Head and neck assembly. The plastic will flex a little to allow you to remove the original head and neck. Install the adapter where the original part was installed.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Smooth PA12, Smooth Versatile Plastic, and Full Color Nylon 12 (MJF)
HIGHLY RECOMMEND testing the Neck connection on Titan Master Heads with No Paint! The neck connection can be tight and I dont want you to scrape the paint off of your Titan Masters with painted heads.
Choose Small for 1 adapter
Choose Medium for 2 adapters
To install, Transform the figure into Robot Mode. Unplug the head and neck from the rectangular port on the back of the robot. Gently pull away thsides of the head from the Head and neck assembly. The plastic will flex a little to allow you to remove the original head and neck. Install the adapter where the original part was installed.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Smooth PA12, Smooth Versatile Plastic, and Full Color Nylon 12 (MJF)
HIGHLY RECOMMEND testing the Neck connection on Titan Master Heads with No Paint! The neck connection can be tight and I dont want you to scrape the paint off of your Titan Masters with painted heads.
Details
What's in the box:
Titan Return Adapter for Hauler (1)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
