3d render showing product detail
1/350 Royal Navy 21" Pentad Torpedo Tubes
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$20.01
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/350 Scale Royal Navy WW2 21" Pentad or FIve Fold Torpedo Tubes for J, K or N Class Destroyers. These are highly detailed parts modelled using the Norman Ough plans and many reference photographs for the most accurate and detailed 21" Pentad or FIve Fold Torpedo Tubes anywhere. See My Shop for set with Spray Shields.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
- 2x Mountings
- highly detailed and accurate parts, modelled from plans and photographic reference.
- details include Hex nuts, Non-slip pattern on Tread Plates, accurate Rivet placement, Handwheels and Operators Chair
- all apparatus is included: Sighting and Training
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
350 Pentad Torpedo Tubes Sprue NS.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
