1/144 HMS Hood Brass Propellers x2 (Port&Star)1/144 HMS Hood Brass Propellers x2 (Port&Star)
1/144 HMS Hood Brass Propellers x2 (Port&Star)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$90.84
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/144 Scale HMS Hood Propeller Set in Brass x2 (1x Port and 1x Starboard). These are for anyone wishing to build a 1/144 Scale HMS Hood (Will need 2x sets due to Shapeways limitations on amount of parts in one Brass print). Accurately modelled from plans and using excellent photographic reference to create correctly shaped HMS Hood Propellers unlike most aftermarket replacements (see photographic reference).
Details include:
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details include:
- Propellers have a hole for shaft placement
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
144 Hood Sprue BR.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
