Clear Ultra Fine Detail Plastic
1/600 Czech OA-82 Jarmila II ARV x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$20.21
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/600 Scale Modern Czech OA-82 Jarmila II Armoured Reconnaissance Vehicle.
Contains 10 highly detailed tanks.
Contains:
OA-82 Jarmila II Armoured Reconnaissance Vehicle
The Jarmila II prototype weighed 3.1 tons, was 4 meters long, 1.95 meters wide, 1.85 meters tall and had a crew of four. The ground clearance of the vehicle was 40 centimeters. It was powered by an improved Tatra T-603 V8 93hp petrol engine, giving it a power-to-weight ratio of 30 hp/t and a maximum speed of 80 km/h. The armor was comparable to the older Soviet BA-64 armored cars – 12mm steel plates at the front and 6mm at the sides. The armament was the most interesting part however – two vz.59 82mm recoilless guns installed on a small rotating turret, capable of 360 degrees traverse. Both guns could fire either HEAT ammunition capable of penetrating 220mm of armor at 30 degrees, or high-explosive rounds to deal with soft targets.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains 10 highly detailed tanks.
Contains:
- 10x Czech OA-82 Jarmila II Armoured Reconnaissance Vehicles
OA-82 Jarmila II Armoured Reconnaissance Vehicle
The Jarmila II prototype weighed 3.1 tons, was 4 meters long, 1.95 meters wide, 1.85 meters tall and had a crew of four. The ground clearance of the vehicle was 40 centimeters. It was powered by an improved Tatra T-603 V8 93hp petrol engine, giving it a power-to-weight ratio of 30 hp/t and a maximum speed of 80 km/h. The armor was comparable to the older Soviet BA-64 armored cars – 12mm steel plates at the front and 6mm at the sides. The armament was the most interesting part however – two vz.59 82mm recoilless guns installed on a small rotating turret, capable of 360 degrees traverse. Both guns could fire either HEAT ammunition capable of penetrating 220mm of armor at 30 degrees, or high-explosive rounds to deal with soft targets.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
600 OA-82 Jarmila X10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
