ENVE Garmin Male Interface (Multi-orientation)

If you have an ENVE designed Garmin Mount and you would like to have a Garmin quarter-turn male mount on the bottom side of that mount, this adapter in combination with a longer screw and added nut will add one. Requires a 3 mm flat top socket screw that is about 7 mm to 8 mm longer. In addition you will need an 3 mm nut, preferably a nylon insert lock nut. The screw replaces the original ENVE screw and the nut fits within the recess on the Garmin male interface. Please note that there are four nibs on the outside of this interface, only two are required. Once you have deterined the correct orientation for your setup, clip off the unneeded two nibs flush with the outer edge.

Versatile vs. Multi Jet Fusion PA12. Why two blacks? 
All 3D prints are made from the same raw white Nylon materials. Black Natural Versatile Plastic is a print that comes straight out of the printer, is cleaned and then placed in a black dye bath. Black Natural Versatile Plastic is not polished or surface finished in any other manner. The result is a grainy/fuzzy surface texture. All other Versatile Plastic parts are polished before dyeing and have a satin sheen as a result of the polishing process. MJF PA12 starts with similar raw material and a liquid binder (gray) resulting in more even and saturated color when dyed. MJF PA12 has a matte finish and slight grainy feel. The technology used in MJF PA12 produces a stronger print.