Tom Rule

tom_rule95

3D modeler, Artist
I take commissions!
Email me: tom.rule95@sky.com
Discord: ToaTom#8322

54
Followers
0
Following
tom_rule95's
tom_rule95 commented on Bionicle Heroes style Kanohi Ignika by tom_rule95
December 14, 2019
Bionicle Heroes style Kanohi Ignika
tom_rule95 @rjsteezy2000 hi, unfortunately the answer to both those questions is no :( this only fits the Metru head.
tom_rule95 @Dimensioner ah, thanks. It looks exactly the same as frosted detail!
tom_rule95 @fb54b9b personally I got it in frosted detail and then painted it gold. That way it looks the most genuine :D
tom_rule95 @Dimensioner hi! I normally don't make the polished ones available because some details get lost, but since you asked, I certainly can :)
tom_rule95 commented on Kanohi Mask of Healing by tom_rule95
November 29, 2019
Kanohi Mask of Healing
tom_rule95 @Visorak1984 What's CBW? and were you Vakama1995? Such a shame to lose all those photos! :O
tom_rule95 @Vakama1995 another great MOC! :D
tom_rule95 @Vakama1995 that's awesome! Thanks for sharing!
tom_rule95 @Avak1827 it's difficult to break by accident as long as you're careful. I have my ignika printed in that plastic and I haven't broken it yet
tom_rule95 @Dimensioner Great job! : D
tom_rule95 @Dimensioner there was no color specified, so I'd probably either go for silver, or get creative!
tom_rule95 commented on Kanohi Mataidentoka by tom_rule95
November 22, 2019
Kanohi Mataidentoka
tom_rule95 @nicoxgarrison Hi-def acrylate used to be an option, but shapeways stopped offering it. I've never tried the premium versatile, but smooth fine detail is quite good. I get the impression it's more brittle than the others though, so if you choose that, be extra careful when attaching/detaching from the model.
tom_rule95 @EZDoesIt I don't know, I've never tried the metals myself. It almost definitely wouldn't be as detailed as the acrylate though.
tom_rule95 @Magnus Hi-Def Acrylate is the closest.
tom_rule95 @valkinthewarden I would assume so. I haven't actually had a chance to try it yet!
tom_rule95 @valkinthewarden It's probably closer to a G1 mask.
tom_rule95 @andrewpeterson8888 I may eventually get round to this, yes. I don't have a template set up for g2 heads yet, so I've got to do that first.
tom_rule95 @Dimensioner I'm pretty busy at the minute, about to take a full time job. Once i settle in, I'll let you know if i can take commissions :)
tom_rule95 @TheChroniclerKnight162 No, I won't just copy the design of an existing mask.
tom_rule95 @professor_x_drehwing sorry, shapeways don't print in gold :( your best option is to get HD acrylate and paint it
tom_rule95 commented on Mask Of Conjuring by tom_rule95
November 15, 2019
Mask Of Conjuring
tom_rule95 @Vakama1995 these are all fantastic! So nice to see you're enjoying the masks!
tom_rule95 @Vakama1995 looks fantastic! Thanks for sharing!
tom_rule95 commented on Kanohi Mask of Avidity by tom_rule95
October 1, 2019
Kanohi Mask of Avidity
tom_rule95 @Vakama1995 thanks for sharing, looks great! :D
tom_rule95 @voxumo they're designed to, but the original commissioner of the mask hasn't sent me any feedback yet.
tom_rule95 commented on Custom Kanohi Mahiki by tom_rule95
December 31, 2016
Custom Kanohi Mahiki
tom_rule95 @Captain_Pimpcard sandstone isn't as strong as plastic, and even some of the plastics struggle to hold up to being used as a Lego piece.
tom_rule95 @Captain_Pimpcard it could be printed in sandstone, but you wouldn't be able to actually use it as a mask without breaking it
tom_rule95 @Captain_Pimpcard it's possible, but the sandstone is nowhere near strong enough to hold up as a usable piece.
tom_rule95 @ZephyrKitsuneLord, hi, all i know is that i didn't model this one to fit on mata heads. You're welcome to try!
tom_rule95 @ZephyrKitsuneLord This fits on the Metru head piece. I have not personally tested this model, but I use the same template for other models that I have tested, therefore it should work fine. The original commissioner made no complaints. Hope you enjoy :)
tom_rule95 @Ryodren I tried, however for this particular mask Shapeways refuses to save the new position. There are a couple of rendered images that should show you the face at the right angle.
tom_rule95 commented on Toa Rori's Kanohi Calix by tom_rule95
November 21, 2016
Toa Rori's Kanohi Calix
tom_rule95 @bakun I'd say the only one I wouldn't get is the hi-def acrylate, since you'd probably have to sand it before painting. The others come with a good enough key which would hold up to a fair bit of wear and tear.
tom_rule95 @bakun hi, I haven't added it because shapeways does not offer coloured plastics unpolished. Unfortunately polishing tends to remove some of the finer details without actually making it smoother. Higher price for worse product. You're better off painting it, using citadel or revell paints
tom_rule95 @EZDoesIt I haven't got one - did you get the address right?
tom_rule95 @EZDoesIt Commissions are still open! email me at tom.rule95@sky.com to arrange one :)
tom_rule95 @cyclonexluna hi, unfortunately Shapeways don't make gold or silver plastic. I recommend buying White strong & flexible or Frosted detail, and then you can use revell or citadel paints to get the colour you like.
tom_rule95 @Chirthorpe Hi, the guy who comissioned this in the first place just recieved his and he says it works fine, so I've put the model back up for sale.
tom_rule95 @Chirthorpe excellent, thanks for the help! :D
tom_rule95 @Chirthorpe thanks ever so much. It's designed for a metru head, do you have the same problems there? I'm sorry its all so experimental, but I can't find precise dimensions for the metru skull anywhere :/
tom_rule95 @Chirthorpe hi, I'm really really sorry that it doesn't fit. Lots of people have previously ordered this and no one has told me! I'll edit the design as soon as my laptop is fixed. Until then, I'll take it off the market. Once again, my deepest apologies. Could you provide some more in-depth description of how or why it doesn't fit?
tom_rule95 @nathan_game_freak This was done as a commission from http://just-a-drawing-cat.tumblr.com , which he designed himself. I only made the 3D printable model. I might do other Inika masks but I'm more biased towards doing commissions.
Check out the latest addition to my kanohi collection! - http://shpws.me/MOjX Kanohi Mataidentoka
tom_rule95 commented on Mask Of Conjuring by PocketWizardJP
March 17, 2016
Mask Of Conjuring
tom_rule95 Hi @PocketWizardJP, one of your previous clients has contacted me to ask if I can model a mask of conjuring based on this design. Are you happy for me to do this?
tom_rule95 commented on Toa Faybos' Kanohi Mektep by tom_rule95
October 1, 2015
Toa Faybos' Kanohi Mektep
tom_rule95 @nathan_game_freak hi, the problems are fixed now!
tom_rule95 @nathan_game_freak I think his was White acrylic. Sorry, this design does need repairing. I believe when he got it it broke under a little too much pressure when trying to push it into the head piece, though I've made the axle smaller since then so that problem ought to be solved.
tom_rule95 @nathan_game_freak Hi, I'm really sorry about this. Did you get charged/refunded? I'll do what i can to the 3D model but I might not be able to get it done all that soon. Someone else managed to order it previously, however it might have been in a different material.
Kanohi Mask of Sensory Aptitude (Revised)
tom_rule95 @Chirthorpe thank you! The design is based off one by dan-de-zille.tumblr.com , who originally commissioned it, so it wasn't really intended to match the comic design - however,I noticed someone else made a much more accurate one.
Next
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.