You must be logged in and verified to contact the designer.
Product Description
This is PART 2 of MoM Chassis, the Inner chassis
This is 2-part chassis with removable core which houses Proffieboard, Speaker, and removable 18650 battery holder. Optional soundboard cover part with holes for 2 sets of 2mm magnets.
You will need to acquire yourself (refer to picture):
- MoM hilt ;
- Crystal Chamber (also work without);
- Proffieboard 2.2;
- Battery Li-ion protected 18650;
- Battery contacts;
- 28mm bass speaker;
- SCWX Rotary Neopixel & 2 Button pcb connector;
- Blade-hilt pixel adapters of your choice;
- 4-pins SMT spring loaded connector with cross-section 2.5mm x 10-11mm and; uncompressed pin height no taller than 4mm; and
- Longer M3 countersink screw to replace control box provided screw for inner chassis retention. One screw is sufficient although I put two pilot holes if you want to replace both screws. I used 8mm in length.
PART 1 Main core chassis here;
https://www.shapeways.com/product/S9EG39B8E/veracity-labs-x-7chambers-x-brr-luke-mom-chassis?optionId=293161391&li=shops
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: