You must be logged in and verified to contact the designer.
Product Description
Chassis for the 89 Saber 2020 Sidious hilts.
I do sell less expensive prints of this chassis on my etsy page:
https://www.etsy.com/uk/listing/879825138/89-sabers-2020-sidious-chassis?ref=SellerDashboard
This is a permanent wired in battery design, not removable.
This chassis is designed for use with:
-Proffie Board
-KR Sabers 24mm Bass speaker
-18650 Lithium Ion Battery
-Shtok Short Pin Hilt side LED PCB (most likely requires sanding down on the outside diameter)
-2.1mm laptop jack style recharge port
-Two 4.3mm tactile switches
-Two individual round neopixels
-KR blade magnet
If you want to see this chassis in action, check out Kyber Kustoms review video via the link:
https://www.youtube.com/watch?v=DrOvzkAlRGg
There are two neo pixels included with each chassis, to light up the accent LED buttons on the hilt. These require gluing on to the included tactile switches after having the wires correctly soldered to them.
This design allows for the board to slide into place once wired up and tested.
The recharge port requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue to secure it.
The chassis is designed to be fully removable from the hilt, though I have designed it so you don't need to fully remove the chassis to gain accesss to the recharge port.
The switch bezzels that come with the hilt vary in length, I suggest unscrewing them a tad before you put the chassis in for the first time to get an idea how much they protrude into the internal diameter.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: