You must be logged in and verified to contact the designer.
Product Description
These links will increase clearance near the axles by about 5mm to to help clear obsticles and/or let the axle(s) drop over edges and get traction. We left it low enough to still protect the driveshaft whilel adding some more clearance.
Links are standard length. If you want to get rid of body rub look at the Rub Fix links we have as well.
Designed with a main 3.2MM bar with vertical bracing and a fat middle on the long links to make sure they hold up to some abuse.
-To Install-
Remove 2 screws from one any of the lower links
One on the axle link mount and one on the skid link mount
Remove link from chassis
Remove pivot balls from old link
Install pivot balls in new links
Install new link where you removed the old link
Be sure to snug the screw so the pivot ball doesn't move side to side
Repeat for the remaining links.
-Material Options- Versatile Plastic and Multijet Fusion are very similar base materials, both Nylon. Versatile plastic is all printed white and then dyed the chosen color. MultiJet Fusion is the chosen color all the way through. MultiJet is limited to 2 colors but also has glass bead options.
-Notes - You need to reuse factory pivot balls or buy a nice fresh set from GPD RC Store
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: