Clear Ultra Fine Detail Plastic
M4 Prowin/Dytac Spec R hop overhaul kit.
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$32.04
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
I have tested this kit with prowin and some clones, it is a perfect fit and does exactly as described.
This is for Prowin/Dytac or other cloned prowin hop ups. It has 5 lock slots to pick where you want the nub seated, the goal is to be on the center of the patch and pivot to apply even pressure at any arm angle. These work great with a smooth packing and Elvish Tac drop in R hop patch. The whole arm/nub kit with a R hop patch and a proper smooth packing makes this a completely drop in mod. The accuracy of this kit can only be done with the 3D printing method locked below. Molding or cnc will not have the same accuracy. If installed right, it will allow the best hop possible with a R hop for a prowin spec hop up. This kit has been tested and works very well. The plastic will break apart when cut or flexed way too far, but it works great for this.
The kit also comes with a set of 3 prowin spec hop wheels, they are different than the factory one. 1 is tight mid range, 1 is tight high range, and 1 is tight low range. This allows much higher accuracy for hop adjustments. Especially needed with r hops.
It comes with 2 complete basic nub and arm kits and 2 long depth arms per print. It also has two slightly shorter depth arms and a speciality nub row at the very bottom if you really want to test things out.
There are multiple variants of each nub length. Some are flat faced, some curved face, and some are curved faced with a taper on the back. The bottom row ones are V cut and two point round cut.
The short set of 8 is great for barrel windows/patches that are not the full length of the hop up window.
The mid length set of 8 is great for a full hop up window with a barrel and patch that is bigger than that window, you dont want it hitting the packing and barrel or it will not work right.
The long set of 5 is great for custom milled hop ups and barrel windows with hand installed r hop patchs. One flat and one curved with a taper on the back.
This kit can do 1-4 builds.
This is for Prowin/Dytac or other cloned prowin hop ups. It has 5 lock slots to pick where you want the nub seated, the goal is to be on the center of the patch and pivot to apply even pressure at any arm angle. These work great with a smooth packing and Elvish Tac drop in R hop patch. The whole arm/nub kit with a R hop patch and a proper smooth packing makes this a completely drop in mod. The accuracy of this kit can only be done with the 3D printing method locked below. Molding or cnc will not have the same accuracy. If installed right, it will allow the best hop possible with a R hop for a prowin spec hop up. This kit has been tested and works very well. The plastic will break apart when cut or flexed way too far, but it works great for this.
The kit also comes with a set of 3 prowin spec hop wheels, they are different than the factory one. 1 is tight mid range, 1 is tight high range, and 1 is tight low range. This allows much higher accuracy for hop adjustments. Especially needed with r hops.
It comes with 2 complete basic nub and arm kits and 2 long depth arms per print. It also has two slightly shorter depth arms and a speciality nub row at the very bottom if you really want to test things out.
There are multiple variants of each nub length. Some are flat faced, some curved face, and some are curved faced with a taper on the back. The bottom row ones are V cut and two point round cut.
The short set of 8 is great for barrel windows/patches that are not the full length of the hop up window.
The mid length set of 8 is great for a full hop up window with a barrel and patch that is bigger than that window, you dont want it hitting the packing and barrel or it will not work right.
The long set of 5 is great for custom milled hop ups and barrel windows with hand installed r hop patchs. One flat and one curved with a taper on the back.
This kit can do 1-4 builds.
Details
What's in the box:
Prowin Spec Kit
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
